G-Tech 79

The Process Meter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated Process Meter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The G-Tech 79 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in eliminates the need to carry a separate resistor.

The G-Tech 79also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative. The G-Tech 79 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.

Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The G-Tech 79 includes Span Check; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.

Accuracy

This Process Meter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.

About this item

• Display: 4 digit LCD display
• Accuracy: ±0.5%
• Maximum allowed Voltage: 30V (within terminals or between terminal and earth ground)
• Operation temperature range: 0°C -50°C
• Operation humidity range= 80%RH
• Storage temperature range = -10°C-55°C
• Storage humidity range: =90% RH
• G-TECH 03+ RTD CALIBRATOR SOURCE & SINK

Features:

• Brand Name : G-Tech
• Model No : GT-03+
• Operation humidity: =80%RH
• Weight: 500g