G-Tech 02

The G-Tech 02 10.00 – 1000V 5Digit LCD Display Calibrator is a precision instrument that is used to calibrate display of electrical instruments and equipment. It can be used to check the calibration of multimeters, digital voltmeters, oscilloscopes, digital multimeters, and other similar instruments that have LCD displays where the numerical readout must conform to specified accuracy or range limits. The backlight on the display helps in viewing the screen in low light conditions which makes it more versatile and convenient to use at different locations and times. It can detect the magnitude of all voltages between 0.01 mV and 1000 V as well as all currents from 1 pA to 1 A. The device can measure frequency with a resolution ranging from 0.001 Hz to 100 kHz, up to 20 MHz. The unit also has two built-in multimeters that can measure resistance from 0.1 Ω to 10 MΩ and capacitance from 1 fF to 100 Mf, as well as an advanced temperature sensor that can measure temperatures from -50°C (-58°F) to +120°C (+248°F). This device can be used to test and calibrate various devices such as microwaves, electric ranges, ovens and refrigerators. The dual display allows you to easily read the measurement results. It provides accurate calibration up to 10% over the entire voltage range. The unit comes with an AC/DC power supply that allows simultaneous voltage and frequency display in mV/V and Hz/kWh modes.

The Calibrator G-Tech 02 communication and supports a select set of the Calibrator universal and common practice commands. This makes the 709H unique as both an affordable, compact loop calibrator and powerful Calibrator communication troubleshooting tool. Calibrator G-Tech 01 general instructions and general application instructions. Able to read the device basic information, perform diagnostic testing and calibration to fine tune most Calibrator transmitter, can store up to 20 Calibrator device configuration file. We are one of leading Calibrator G-Tech 02 Supplier.