Metrix + FNxL

Features:

• Large Display for better readability
• Zero-point calibration and multi-point calibration
• Two measure modes: single and continuous
• Selectable um/mil measuring units

Applications:

This Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and able to work steadily in the laboratory, workshop and outdoors.

Measuring Principle:

This instrument has an in-built probe which uses the principle of electromagnetic induction to measure the thickness of non-magnetic coatings on magnetic substrates(steel/iron) and eddy current principle to measure thickness of non-conductive coatings on non-magnetic substrates (aluminium, copper, brass).  

SPECIFICATION

Model	Metrix + Coat Gauge FN xL
Measuring principle	Magnetic induction(F) & Eddy Current(NF)
Measuring range	0 to 1500um (0 to 59mils)
Accuracy	±(2.5%+2um)
	±(2.5%+0.08mil)
Resolution	0.1um/0.01mil
Calibration	Zero Calibration, Multi-Points Calibration
Units	um , mils
Minimum curvature radius	1.5mm(convex)
	25mm(concave)
Minimum measuring area	Diameter 6mm
Minimum thickness of substrate	0.5mm(0.02”)(F)
	0.3mm(0.012”)(NF)
Power supply	4 x 1.5V AAA battery
Operation environment	Temperature: 0 to 40℃(32 to 104℉)； Humidity: 20% to 90%rh
Size	155mm×62mm×35mm(6.10″×2.44″×1.38″)
Weight	125g(4.14 oz)
Standard Accessories	Coating Thickness Gauge, ‘0’ calibration block, standard foils, batteries, Technical manual.